Datron Products Co., Ltd.
P.O.Box 56-48,Taipei,Taiwan
TEL: 886-2-25079686
FAX:886-2-25062811
Email: ups@datron.com.tw

















AP3-Series 10-400KVA On-line Double Conversion Three Phase UPS / Inverter /Frequency Converter Full Digitalized Intelligent Galvanic Isolation Design

Features
  • Advanced Technology DSP IGBT Components
  • Wide Input Range, Robust Design For Harsh Environment
  • Multi-CPU and Software/Hardware Cooperate Control
  • DC Start Function, Can be Started without AC
  • True Galvanic Isolation Design
  • Modular Design for Easy Maintenance and Minimize MTTR
  • Intelligent, Safe and Unique Battery Management System
  • Variety of Accessory
  • Parallel Operation
  • Specifications Can be Customized
    		•

    Advantages
    Advanced technology DSP, IGBT and switching components:
    To increase the reliability and efficiency.
    True Galvanic isolation design:
    An isolated transformer is put at the output, can solve the problem of poor input grounding, can accept a different ground between input and output and can avoid the annoying problem of ground leakage current. The user gets the bonus of attenuation of common mode noise from the output isolation transformer.
    Multi-CPU design and software/hardware cooperate control:
    Several CPUs are employed in the control circuit, critical functions are designed to parallel redundancy to improve reliability.
    Redundant power supply:
    An extra power supply is connected redundantly to supply power of the static switch, so that, there will be AC output no matter what happen to the UPS.
    Plug & play modular design:
    The power circuit is separated into several modules plugged into slats in the UPS, which is easy to pull out, perms quick maintenance and easier trouble-shooting. Therefore, it can be regarded plug and play modules.
    Each phase with individual inverter supporting:
    Characteristics will not be violated under 100% unbalance load.
    Protection against detaching and floating of the neutral of input power supply:
    MOV (surge protector) is added at the input, provide sufficient protection to both UPS and the load from any lighting or surge caused by neighboring large loads.
    User friendly control design:
    UPS is designed with breaker on/off sensor, power supply sensor etc.. Therefore, any operational mistake made by the user causes no harm to the UPS.
    Intelligent charger with temperature compensation:
    To improve the battery life expectancy
    Huge charging power (selectable):
    The charge power is selectable (Lo/Me/Hi) according to Ah of the battery, and can charge up battery of more than 8 Has back-up time without adding extra charger.
    Intelligent, safe battery test circuitry:
    Battery is tested after every boost charge of battery (either initiated by battery discharge or by one month has elapsed) without stopping the rectifier. II prevents the risk of output AC (allure in case of battery bad and can inform the user the battery condition.
    Intelligent fan speed control:
    Fans will slow down under light load. so that the life expectancy of the fans is longer than a is specified MTBF of fans are extended
    Reasonable heat evacuation passage design:
    Control circuitry and power circuitry are physically separated Therefore the UPS system can operate under harsh environment.
    DC start function:
    The UPS can be started without AC source, that is, can be started with battery only, because current limit circuitry is added. It can prevent the problem of many UPS that the big inrush current blow the battery fuse and hurts the DC capacitor when battery is
    connected to empty DC bus (before the DC bus is energized).
    Various interface options:
    Remote control panel, 3 phases software for PC monitoring, auto dialing module, battery monitoring module, 3 phases SNMP card, and emergent stop switch are available.
    12-Pulse Full Controlled Rectifier (option):
    In order to further improve the power factor and reduce harmonic current drawn by the rectifier, our UPS from 100KVA and above use the 12-pulse full controlled rectifier. The total current harmonic current can be reduced to around 10%, and power factor is improved to over 0.8. A phase shift transformer is added to achieve the performance. The input inductor is retained too to obtain the best result. Although the cost is higher, it is more reliable and rugged topology. The user needs not to increase the input breaker and cable, input KVA and harmonic current drawn is minimized to fulfill the worldwide energy saving requirements.
    Parallel Operation (option):
    To increase the capacity and reliability. Load is equally shared between paralleled units. When one of the units has problem, the other units continue running without output interruption. No site adjustment is required.

    Other
    UPSCANTTM - Remote Control Penal
    A hand held display module with LCD and LED can monitor 1 - 99 UPSs with RS-085 connected in series from distance < 1000M.
    UPSCOMTM - PC Monitoring Software
    Can provide real-time three phases information of UPS connected on the line and monitor several Li with one PC.
    DCMANTM -Battery Monitoring Module
    An intelligent module to keep watching each battery in a battery bank connected in series and can distinguish and repair the aged battery before it is seriously worn out.
    SNMP/HTTP agent
    Can monitor and manage the UPS through Web browser and Java apples, providing simultaneously three phases data acquisition.
    Emergency Stop Switch
    In case of hazard, for example, electric shock, fire or earthquake, the UPS can be shutdown (Will have no AC at the output) either through a switch (can be added upon request) or through smoke detector signal (can be added upon request) to prevent further injuries or destruction

    Specifications
    PHASE
    3 Phase Input / 3 Phase Output
    KVA
    10
    20
    30
    40
    50
    60
    80
    100
    120
    160
    240
    320
    400
    INPUT (RECTIFIER)
    Input Voltage
    190V / 208V / 380V / 400V / 415V / 440V / 480V / 600V, 3P4W a 3P3W
    Input Range
    +/-20% (> +/-L20% is available upon request)
    Input Frequency
    50 / 60 Hz + / -5Hz
    Power Walk In
    0% -100 : 20 sec
    Efficiency
    >98%
    Voltage Regulation
    + / -1%
    BATTERY
    Battery Type / Pcs
    Maintenance free lead acid batteries / 12V x 29pcs
    Maximum Charge Current Adc (Selcetable)
    5
    10
    15
    20
    25
    30
    40
    50
    60
    80
    120
    160
    20
    Battery Start
    Yes, UPS can be started without AC source.
    INVERTER
    Output Voltage, Regulation
    190V / 208V / 380V / 400V / 415V / 440V / 480V / 600V, 3P4W or 3P3W + / -1%
    Wave Form
    Sine Wave
    Output Power Factor
    0.8
    Frequency Lock Range
    50 / 60 Hz + / - 3Hz
    Output Frequency (Free Running)
    50 / 60 Hz + / - 0.1Hz
    Phase Shift Under 100% Unbalance Load
    < 0.5°
    THD (Linear Load)
    < 2%
    Overload <110%
    Continuous
    110-125%
    15 minutes
    125-150%
    10 minutes
    >150%
    30 seconds
    Efficiency (100% Load)
    93%
    93.5%
    94%
    94.5%
    95%
    STATIC SWITCH
    Voltage Range
    173-277 VAC (L-N)
    MainsInverter
    0 ms
    OVERALL CHARACTERISTICS
    Overall Efficiency
    91%
    91.5%
    92%
    92.5%
    93%
    Maximum Heat Dissipations (Kw)
    1.1
    1.3
    1.9
    2.6
    3
    3.5
    4.6
    5.4
    6.5
    8.7
    13
    17.4
    21.7
    Width x Height x Depth (mm)
    550 x 1600 x 800
    1100 x 1600 x 800
    2200 x 1600 x 800 x 3300 x 1600 x 800(400K)
    Weight (Kg. without battery)
    270
    300
    400
    480
    550
    680
    820
    950
    1180
    1450
    2900
    3100
    3500
    Audible Noise
    < 65 dBA (At 1 M)
    < 67 dBA (At 1 M)
    < 70 dBA (At 1 M)
    Temperature / Humidity
    0-40 degree C ; 32-104degree F ; 0% - 90% (Non-Condensing)
    Altitude
    < 1500 M Above Sea Level
    FCC CLASS A, EN50091-1,-2
    YES
    Short Circuit Pretection
    Rectifier, Reserve, and Bypass
    Lightning / EMC Filter
    MOV / Input & Output
    Galvanic Isolation
    Input & Output true Galvanic isolation
    Indicator & Alarm
    LCD, LED, Mimic Display, Buzzer
    Remote Control / Communication Interface
    Monitoring 1-99 UPS simultaneously / Dry contact, RS232, RS485

    top